Opengear ACM7000-L Resilience Gateway
Resilience Gateway with Smart OOB™ and Failover to Cellular™
- Smart OOB with Failover to Cellular
- Maintain network connectivity during failures with IP Passthrough
- Available with 4 port embedded switch
- Flexibility with built-in 4 USB console ports
- New highspeed global cellular modem - LTE-A Pro
- Built-in digital I/O and high voltage I/O
- Compact and powerful hardware with integrated 4 GB internal storage
The ACM7000-L Resilience Gateway ensures uptime at branch offices, retail stores, kiosks and other remote sites. Cellular access provides an always-on gateway to your off-site network devices, even when the primary network is down.
Identify and remediate issues at the network edge before they become failures with Smart OOB™. Maximize WAN resilience with Failover to Cellular™ to 4G LTE networks and built-in multicarrier capabilities.
- 4-8 serial ports, out-of-band management of network and server devices
- 4 x USB 2.0 console ports, out-of-band management of network and server devices
- Automatically detect and recover from outages and repair equipment faults
- Link Layer Discovery Protocol (LLDP) discover, identify and verify attached devices on your local network.
Smart OOB
Opengear’s solution raises secure remote access and infrastructure management to a new level. Smart OOB extends traditional out-of-band management to monitor and log systems health and environmental conditions, proactively detecting faults before they become failures.
- Maintain complete control during infrastructure fault conditions and network outages with serial, Ethernet and USB console access to all the server, networking, and power infrastructure at the remote site
- Proactively detect faults before they become failures
- Automated response with customized rules and policies undertaking complex actions depending on what is detected
- Rapid problem identification, quick notification and prompt response to system or network connectivity issues reduces MTBF
- Sophisticated troubleshooting and remediation at the edge reduces MMTR and operating costs
- Smart alert escalation through SNMP, email and direct SMS
- Some models include built-in 3G/ 4G LTE cellular modem provides secure alternate path for trouble-shooting and repair
- Bulletproof remote site management with 4-8 ports
Failover to Cellular™
Opengear smart automation capabilities alert operators and automatically restore site connectivity using high-speed 3G or 4G LTE cellular. Built on reliable IP Passthrough technology and integrates with your existing networking routers to ensure uninterrupted availability for remote networks over high-speed 4G LTE or 3G cellular networks when the router’s primary Internet connection fails.
- Ensures WAN connectivity and continued business operations via failover to high speed cellular networks
- Simple LAN-to-WAN IP Passthrough technology ensures easy interoperability with all major enterprise routers
- Transparent, automatic failover and failback
- Wireless 4G LTE offers speeds fast enough to keep the network running smoothly
- Integrates seamlessly with existing IT systems and network infrastructure
- Interoperability with all major enterprise routers
- Embedded cellular module with multi-carrier capabilities enables selection of best carrier at each remote
Strong Security & Authentication
Efficiently and securely manage your network infrastructure with:
- Lock down management interfaces with local and remote AAA including Active Directory, Kerberos, TACACS+ and RADIUS with RSA SecurID
- Encrypt sensitive management traffic with IPsec and OpenVPN
- Comprehensive logging features for compliance and audit trail
- PCI DSS 3.2 compliance (Download PCI DSS 3.2 Best Practices Whitepaper)
- FIPS 140-2 validated encryption for government and military applications
- Single point of authentication and policy enforcement, monitor and log each management keystroke
USB Console Management
Opengear’s USB console management gives you added flexibility to connect to the next generation of USB console only devices.
- USB provides an easy plug and play solution
- Seamless USB console integration without additional software
- Smart OOB for devices with USB only console ports
- Eliminate proprietary cabling and setup
- Support for a broader range of vendor equipment
- Higher data transfer rates reduce downtime during firmware and configuration deployments
TECHNICAL SPECIFICATIONS
- Console Specifications
- Console Ports
ACM7004-2-L – 4 x RJ45 RS-232 Cisco straight pinout console ports
ACM7004-5-L – 4 x RJ45 RS-232 Cisco straight pinout console ports and 4 port embedded Gigabit Switch
ACM7008-2-L – 8 x RJ45 RS-232 Cisco straight pinout console ports
Interface
- Ethernet Ports
ACM7004-2-L – 2 x 10/100/1000 Ethernet
ACM7004-5-L – 4 x 10/100/1000 Ethernet Switch and 1 x 10/100/1000 Ethernet/SFP Uplink
ACM7008-2-L – 2 x 10/100/1000 Ethernet
All Ethernet/SFP Fiber port with 1500V AC Isolation and ESD Protection
Serial Ports
Cisco straight 50 to 230,400 bps
USB Ports
4 x USB 2.0 Console Ports
Remote Access
Integrated 4G LTE Cellular Card, Dual Ethernet, aggregation & redundancy, Automatic Network Failover, Easy browser UI, IPv6
I/O Ports
2 x TTL level Digital I/O ports (DIO) 5V DC max @ 20mA (supports external water /smoke / motion dry contact sensors)
2 x High Voltage Digital Outputs (HVDO) 5-30V DC@ 100mA (drives relays, alarms, etc.)
Console Management
Built-in web terminal
SSH direct to consoles
Optional console keystroke logging
Alert on cable disconnects, text pattern match and more
Inline power control
Multiple concurrent sessions
Power Requirements
- Power Adapter
110-240V AC to 12V DC external power adapter
PSE Mark, BIS Mark
Power Consumption
Less than 11.5W
Physical Dimensions
- Dimensions and Weight
5 1/8 x 4 3/4 x 1 3/8 in – 1.3 lbs.,
13 x 12 x 3.5 cm - 0.6 kg
Form Factor
Compact
Memory & CPU
- CPU
800 MHz Armada 370 ARMv7 SoC (Marvell 88F6W11)
Memory
256 MB DDR3 SDRAM
32 MB Embedded NOR Flash
Internal Storage
4 GB NAND Flash
Environmental
- Operating Temperature
-25°C to 60°C, -13°F to 140°F
Storage Temperature
-40°C to +75°C, -40°F to +167°F
Humidity
5% to 90%
Environmental Monitoring
Internal temperature sensor and external serial EMD5000 device supports physical, smoke, water leak, vibration sensors
MTBF
100,000 Hours (Power Supply)
Security, Encryption & Authentication
- SSH
FIPS-140-2 compliant Open SSL Module
Strong ciphers -AES encryption
Cisco-compatible IPsec
OpenVPN
AAA – TACACS+, RADIUS, Active Directory/OpenLDAP, Kerberos, with local fallback
Two-factor authentication via remote AAA
Configurable stateful firewall
Actively developed & support and security notifications-frequent firmware updates
Automation & Scalability
- ZTP, Lighthouse
RESTful API, programmable and extensible
Auto-Response, SNMP, LLDP, NTP
Cellular
- Modules
Sierra Wireless EM7565
Cat-12 600Mbps/150Mbps (Download/Upload)
Cellular Certification
AT&T and Verizon Certified
MIC-R and MIC-T Certified Japanese carriers
PTCRB, GCFKDDI/docomol/Softbank/Telstra (Coming Soon)
Certifications
- Emissions
EN 55022:2010, CISPR 22:2008, FCC Part 15 Subpart B:2015,
ICES-003 Issue 5 (2014), AS/NZS CISPR 22:2009+A1:2010,
EN 61000-3-2:2006/A2:2009, EN 61000-3-3:2008
Immunity
EN 55024:2010, CISPR 24:2010,
EN 61000-4-2:2009, EN 61000-4-3:2006+A2:2010, EN 61000-4-4:2004+A1:2010,
EN 61000-4-5:2006, EN 61000-4-6:2009, EN 61000-4-8:2010, EN 61000-4-11:2004
Other Agency Approvals
CE, UL 1950, TUV, C-Tick, RoHS compliant,
Security features to support NERC CIP standards,
FIPS 140-2 validated module Certificate #2473
Ordering Information | ||
Available Models | ||
Model | Description | |
8 Port Resilience Gateways | ACM7008-2-L | 8 serial Cisco Straight pinout, ext power, 2 GbE Ethernet, Global LTE-A Pro Cellular module, dual SIM, 2 DIO and 2 output ports. (Verizon certification pending) |
4 Port Resilience Gateways | ACM7004-5-L | 4 serial Cisco Straight pinout, ext power, 1 GbE Ethernet or fiber SFP & 4 port GbE switch, Global LTE-A Pro Cellular module, dual SIM, 2 DIO and 2 output ports | ACM7004-2-L | 4 serial Cisco Straight pinout, ext power, 2 GbE Ethernet, Global LTE-A Pro Cellular module, dual SIM, 2 DIO and 2 output ports |
Package Checklist
- Resilience Gateway
- External rack mount tab
- Black terminal block
- 2 x Blade antennas
- DB9F-RJ45 adapter
- 4 x Rubber feet
- 12v Global Power Supply
- Antenna Extension Kit
- Quick Start Guide
Ordering Information | ||
Available Models | ||
Model | Description | |
Adapters | 319014 | Adapter - DB9F to RJ45 straight serial - DCE -For X2 Pinout | 319015 | Adapter - DB9F to RJ45 crossover serial - DTE -For X2 Pinout | 319016 | Adapter - DB9M to RJ45 straight serial - DCE - For X2 Pinout |
Environmental | EMD5000-02 | Environmental Monitoring Device – X2 Pinout | EMD5781-10 | Door contact sensor – 10′ Cable length | EMD5782 | Vibration sensor – 3′ Cable length | EMD5779-Q | Smoke detector/alarm (220V AC, IEC C-13) | EMD5890-QA | Smoke detector/alarm (110V AC, NEMA 5-15) | EMD5780 | Water leak detector – 3′ Cable length |
Mounting | 590003 | Rack Mount Kit - Ears and Screws - ACM7000 | 590012 | DIN Rail - ACM7000 | 590033 | Rack Mount Tray - All ACM Series |
Power Supply | SDC48-12V-4PIN | Power Supply – External D/C 12v (36v to 72v) |
450031 | Power Supply – 12VDC Four Chamber Square Connector | |
450032 | External AC 12V with IEC C13/C14 input | |
Wireless Accessories | 569041 | Antenna – Blade LTE-A Pro with swivel base (-L Devices) | 449041 | Antenna Extender - Magnetic Base with 10' Cable | 569018 | Antenna – GPS Active – 6′ Cable length – For all 4G LTE Cellular units | 569028 | Antenna - 5" Blade 4G LTE with swivel base (-LMx models) | 590051 | Antenna Extension Kit |
Kunden, die diesen Artikel gesehen haben, sahen auch