MOXA UC-7110 / UC-7112
Product is End of Life : 2020-08-03
Mini RISC-based Ready-to-Run Embedded Computer with 2 Serial Ports, Dual Ethernet, SD
- Mini controller with ready-to-run platform for customized applications
- 32-bit ARM9 RISC microcontroller
- 16 MB RAM (about 12 MB of user programmable space)
- 8 MB Flash ROM (about 4 MB of user programmable space)
- Auto-sensing 10/100 Mbps Ethernet ports x 2
- Software-selectable RS-232/422/485 ports x 2
- Supports SD socket for storage expansion
- Built-in RTC, Buzzer, WatchDog Timer
- Built-in µClinux Communication Platform
- Supports standard TCP/IP protocol stack
- GNU GCC cross-compiler
- -40 to 75°C wide temperature models available
Die UC-7110/UC-7112-Kommunikationsplattformen auf Mini RISC-Basis eignen sich ideal für Ihre embedded Anwendungen.
Die Computer verfügen über zwei serielle RS-232/422/485-Ports und zwei 10/100 Mbps Ethernet-LAN-Ports, um den Anwendern eine vielseitige Kommunikationsplattform zu bieten.
Das Modell UC-7110/UC-7112 verwendet die ARM9 RISC-CPU. Im Gegensatz zur X86-CPU mit einem CISC-Design stellen die RISC-Architektur des ARM9 und moderne Halbleitertechnologie für die CPU eine leistungsfähige Datenverarbeitungs-Engine und Kommunikationsfunktionen bereit, ohne zu viel Abwärme zu erzeugen. Das integrierte NOR Flash-ROM mit 8 oder 16 MB und 16 oder 32 MB SDRAM bieten ausreichend Speicherplatz. Der SD-Sockel des UC-7112 stellt den Anwendern eine flexible Speichererweiterung zur Ausführung von Anwendungen zur Verfügung, die eine große Menge an Daten erzeugen. Die beiden LAN-Ports des ARM9 machen das Modell UC-7110/UC-7112 zu einer idealen Kommunikationsplattform für einige Datenerfassungs- und Protokollkonvertierungsanwendungen. Mit den beiden seriellen RS-232/422/485-Ports können Sie eine Reihe serieller Gerätetypen verbinden.
Das vorinstallierte μClinux-Betriebssystem ist ein offenes Softwarebetriebssystem für die Programmentwicklung. Dies bedeutet, dass Software für Desktop-PCs mit einem GNU-Cross Compiler ganz einfach für den UC-7110/UC-7112 portiert werden kann, so dass Sie keine Zeit für das Modifizieren vorhandener Software aufwenden müssen. Das Betriebssystem, die Gerätetreiber und Ihre eigene Software können im Flash-Speicher des UC-7110/UC-7112 abgelegt werden.
Das Modell UC-7110/UC-7112 verwendet die ARM9 RISC-CPU. Im Gegensatz zur X86-CPU mit einem CISC-Design stellen die RISC-Architektur des ARM9 und moderne Halbleitertechnologie für die CPU eine leistungsfähige Datenverarbeitungs-Engine und Kommunikationsfunktionen bereit, ohne zu viel Abwärme zu erzeugen. Das integrierte NOR Flash-ROM mit 8 oder 16 MB und 16 oder 32 MB SDRAM bieten ausreichend Speicherplatz. Der SD-Sockel des UC-7112 stellt den Anwendern eine flexible Speichererweiterung zur Ausführung von Anwendungen zur Verfügung, die eine große Menge an Daten erzeugen. Die beiden LAN-Ports des ARM9 machen das Modell UC-7110/UC-7112 zu einer idealen Kommunikationsplattform für einige Datenerfassungs- und Protokollkonvertierungsanwendungen. Mit den beiden seriellen RS-232/422/485-Ports können Sie eine Reihe serieller Gerätetypen verbinden.
Das vorinstallierte μClinux-Betriebssystem ist ein offenes Softwarebetriebssystem für die Programmentwicklung. Dies bedeutet, dass Software für Desktop-PCs mit einem GNU-Cross Compiler ganz einfach für den UC-7110/UC-7112 portiert werden kann, so dass Sie keine Zeit für das Modifizieren vorhandener Software aufwenden müssen. Das Betriebssystem, die Gerätetreiber und Ihre eigene Software können im Flash-Speicher des UC-7110/UC-7112 abgelegt werden.
Hardware Specifications
Computer
CPU
MOXA ART ARM9 32-bit RISC CPU, 192 MHz
OS (pre-installed)
μClinux or Linux
DRAM
UC-7110/7112: 16 MB
UC-7112 Plus: 32 MB onboard
Flash
UC-7110/7112: 8 MB onboard
UC-7112 Plus: 16 MB onboard
Storage
Storage Expansion
SD slot (UC-7112, and UC-7112 Plus only)
Ethernet Interface
LAN
Auto-sensing 10/100 Mbps (RJ45), 2 ports
Magnetic Isolation Protection
1.5 kV built-in
Serial Interface
Serial Standards
RS-232/422/485 software-selectable (DB9 male), 2 ports
ESD Protection
15 kV ESD for all signals
Console Port
RS-232 (TxD, RxD, GND), 3-wire pin-header
Serial Communication Parameters
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate
50 bps to 921.6 kbps (supports non-standard baudrates; see user´s manual for details)
Serial Signals
RS-232
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422
TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w
TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w
Data+, Data-, GND
LEDs
System
Ready
LAN
LED located on the RJ45 connector,
10M/Link x 2, 100M/Link x 2
Serial
TxD x 2, RxD x 2
Physical Characteristics
Housing
Aluminum (1 mm)
Weight
190 g
Dimensions
77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)
Mounting
DIN rail, wall
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Anti-Vibration
1 g @ IEC-68-2-6, sine wave (resonance search), 5-500 Hz, 1 Oct/min, 1 cycle, 13 min 17 sec per axis (UC-7110 only)
Power Requirements
Input Voltage
12 to 48 VDC
Power Consumption
4.5 W
- 170 mA @ 24 VDC
- 340 mA @ 12 VDC
Standards and Certifications
Safety
UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1
EMC
EN 55022 Class A, EN 61000-3-2 Class A, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B Class A
Green Product
RoHS, CRoHS, WEEE
Reliability
Alert Tools
Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger
Built-in WDT (watchdog timer)
Note
These hardware specifications describe the embedded computer unit itself, but not its official accessories. In particular, the wide temperature specification does not apply to accessories such as power adapters and cables.
Software Specifications
Linux (UC-7112-LX Plus only)
Kernel Version
2.6.9
Protocol Stack
TCP, UDP, IPv4, SNMP V1, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSH 1.0/ 2.0, SSL, DHCP, NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
File System
JFFS2 (on-board flash)
System Utilities
bash, busybox, tinylogin, telnet, ftp, scp
telnetd
Telnet Server daemon
ftpd
FTP server daemon
sshd
Secure shell server
Apache
Web server daemon, supporting PHP and XML
openvpn
Virtual private network service manager
iptables
Firewall service manager
pppd
dial in/out over serial port daemon & PPPoE
snmpd
snmpd agent daemon
inetd
TCP server manager program
Application Development Software
- Moxa Linux API Library for device control
- Linux Tool Chain: Gcc, Glibc, GDB
μClinux
Kernel Version
2.6.19
Protocol Stack
TCP, UDP, IPv4, SNMP V1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
File System
JFFS2 (on-board flash)
System Utilities
msh, busybox, tinylogin, telnet, ftp
pppd
dial in/out over serial port daemon & PPPoE
snmpd
snmpd agent daemon
telnetd
Telnet Server daemon
inetd
TCP server manager program
ftpd
FTP server daemon
boa
Web server daemon
Application Development Software
- Moxa Linux API Library for device control
- Linux Tool Chain:
- Arm-elf-gcc: C/C++ PC Cross Compiler
- μClibc: POSIX Standard Library
Ordering Information | |
UC-7110-LX | Mini RISC-based Ready-to-Run Embedded Computer with 2 Serial Ports, Dual LANs, µClinux OS |
UC-7112-LX | Mini RISC-based Ready-to-Run Embedded Computer with 2 Serial Ports, Dual LANs, SD, µClinux OS |
UC-7112-LX Plus | Mini RISC-based Ready-to-Run Embedded Computer with 2 Serial Ports, Dual LANs, Linux OS |
Wide Operating Temperature Models (-40 to 75°C) | |
UC-7110-T-LX | Mini RISC-based Ready-to-Run Embedded Computer with 2Serial Ports, Dual Ethernet, µClinux OS, Wide Temperature |
All items include |
|
Optional Accessories | |
DK35A | DIN-Rail Mounting kit (35 mm) |
Kunden, die diesen Artikel gesehen haben, sahen auch